#THINGIVERSE HYPERCUBE UPGRADE#
#THINGIVERSE HYPERCUBE FULL#

I have uploaded the step files just in case someone finds them useful. After the adjustment you fix the hotend in place by thightining the clamp. The adjustment on the Right hotend is using an M3 screw and a spring inside to adjust. I have my fan on the back see My X-Carriage. Could not find a version where you can align the hotends in a easy way. Extended Z axis motor mount to allow an additional 20mm clearance just in case I want to change to individual lead screws rather than the integrated ones currently installed. Working on a dual hotend mount for my hypercube (for printing infill).New Universal Mounting Block with a lot more fixing options.New PSU holder with a separate USB feed for the Raspberry Pi if required.Clip Slot System for the Extrusion to tidy all the cables.Easy access hinged Electronics enclosure.New Mini Boothy & Manta MK2 adapted Hot Ends.I have retained the majority of the existing parts but the new Designs include: The big advantage of Klipper being that I do not need a onboard screen which helps wire management immensely on the HEVO. I therefore decided it needed some TLC and along the way I have Klipperised and redesigned some new parts to make it a tidier machine.

#THINGIVERSE HYPERCUBE FULL#

Without belts installed, both the X and Y move freely with no binding (Y with gravity, X needs some assistance due to the bushings, but it's not exactly difficult to move).After 2 years of full on usage my HEVO was showing some signs of wear with thermal issues and some Z banding due to the Z axis assembly binding. Parts were printed on a crappy Chinese i3 clone, they came out functional but far from perfect. On the Hypercube Evolution thingiverse page, they have a spreadsheet to help you design and build a list of materials that are needed, along with the.

HyperCube Evolution 3d printer is one of the best 3d printers available in. If it helps, it's a standard build (200mmВі print size), 2020 extrusion, 10mm carbon fibre w/polymer bushings, 8mm (7.96) steel rods w/LM8LUU bearings, held together with those crappy Banggood brackets (maybe this is part of the problem?). 601 3D Printer build log is updated on Thingiverse: https KeyBak Super48 in. The HyperCube Evolution also known as H.E.V.O is a CoreXY printer designed by Scott 3D and inspired by the original.

#THINGIVERSE HYPERCUBE UPGRADE#

There are a number of mods and add-ons that allow you to upgrade your printer. HyperCube Evolution by SCOTT3D - Thingiverse Download files and build them with your 3D printer, laser cutter, or CNC. Being the first large print I've done I thought I'd test the movement first and noticed the wandering. The Hypercube Evolution is one of the main Core-XY designs youвЂ™ll find on Thingiverse. I didn't really notice the problem initially as I was only printing small parts, but it arose the other day whilst preparing to print a large (180x100 ish) piece. I've tried multiple combinations of belt tension tight, loose, one tight one loose etc. Same goes for the Y axis home X & Y, start moving along the Y and the carriage moves to the right the further away from home I go (and again, disengages the X endstop at around 30mm from home).

It's a good couple of mm or so movement at either end, enough to disengage the Y endstop at around 40mm of X travel. Check out tierant5's collection Hypercube Mods. For example, if I home X & Y, then start moving the carriage along the X axis, the right bearing block starts moving towards me and the left one away. There's a slight twist somewhere that's causing the X/Y carriage to wander somewhat at the extremities of the bed. So I've just taken my 'cube completely apart and started to rebuild from scratch, on a flat glass table, making sure to align/square the frame as best I could (armed only with a set square) and I'm still running in to the same problem.

Thingiverse hypercube